Concrete Bundle Bar Analyzer

Concrete Bundle Bar Analyzer MCP Connector for Claude

A+

Verify bundle bar compliance and spacing requirements using ACI provisions.

4 tools Official Updated Oct 1, 2026 Official Vinkius Partner

This MCP server provides structural engineering tools to analyze bundled reinforcement bars according to ACI standards. It calculates effective diameters, determines development length modification factors, and validates clear spacing to prevent concrete honeycombing. Engineers can use check_bundle_compliance to verify configuration safety, calculate_development_length_modifier for bond efficiency, validate_spacing_requirements for aggregate flow, and evaluate_congestion_index to assess reinforcement density.

aciconcretereinforcementstructuralengineering

4 tools expose this connector's capabilities to your AI agent.

check_bundle_compliance

Determines if a specific bundle configuration meets ACI requirements for effective diameter and spacing

evaluate_congestion_index

Quantifies how "crowded" a section of concrete is to alert the engineer to potential placement issues

validate_spacing_requirements

Specifically checks if the gap between bundles or individual bars is wide enough for the specified concrete grade

calculate_development_length_modifier

Computes the adjustment factor required for development length when using bundled bars

See how to talk to your AI agent using Concrete Bundle Bar Analyzer.

Check if a bundle of 4 bars with 20mm diameter is compliant with 30MPa concrete and 40mm clear spacing.

The bundle configuration is compliant. The effective diameter is 34.64mm and the required clear spacing is 35mm.

What is the development length modifier for 5 bars of 25mm diameter in a contact splice?

The modification factor for this contact splice configuration is 0.72, resulting in an effective bond strength ratio of 0.72.

Is a 30mm gap sufficient for a 25mm bar with 20mm maximum aggregate size?

Yes, the spacing is adequate for the specified aggregate size.

The tool uses ACI provisions to calculate how bundled bars behave as a single unit, specifically adjusting for effective diameter and reduced bond strength.

Related Connectors