MCP For Claude Marketplace
Tailings Dam Safety Assessment

Tailings Dam Safety Assessment MCP Connector for Claude

A+

Professional engineering tool for evaluating tailings dam stability, seismic resilience, and flood risk.

4 tools Official Updated Oct 1, 2026 Official Vinkius Partner
More Details Connect to Claude

This MCP server provides specialized engineering tools to assess the structural integrity of tailings storage facilities. It allows AI agents to perform critical safety calculations including analyze_slope_stability to check resistance against sliding, evaluate_seismic_resilience to assess liquefaction risks during earthquakes, and simulate_flood_impact to predict overtopping risks. Finally, it uses classify_dam_risk to assign formal risk categories based on technical metrics and consequence tiers.

tailingsdam-safetystabilityseismicflood-risk

4 tools expose this connector's capabilities to your AI agent.

analyze_slope_stability

Determine if the current dam geometry and material properties provide sufficient resistance against sliding

classify_dam_risk

Assign a formal risk category to the facility based on technical analyses

evaluate_seismic_resilience

Assess how the dam reacts to earthquake-induced accelerations and the risk of liquefaction

simulate_flood_impact

Predict the risk of overtopping and internal erosion during extreme precipitation or inflow events

See how to talk to your AI agent using Tailings Dam Safety Assessment.

Check the slope stability for a dam with height 50m, crest width 10m, slope angle 25 degrees, and slope length 100m, using cohesion 20, friction angle 30, and unit weight 18, with a phreatic surface height of 5m and pore pressure 2.

The factor of safety is 1.65, and the stability status is Stable.

What is the risk of overtopping if a flood with an inflow rate of 500 m3/s for 2 hours hits a dam with 5m of freeboard?

The overtopping risk is Low, and the erosion potential is minimal.

Classify the risk for a dam with a factor of safety of 1.05 and a High consequence category.

The risk level is Extreme, with an urgency rating of High.

You can calculate the factor of safety for slope stability, assess seismic resilience and liquefaction risk, simulate flood impacts, and classify the overall dam risk level.

Related Connectors

Grade Control Modeling

Grade Control Modeling MCP

4 tools Official

Models grade control for ore/waste discrimination to optimize extraction accuracy.

A+ View details →
Risk Matrix Calculator

Risk Matrix Calculator MCP

4 tools Official

Quantify risk levels using configurable assessment matrices.

A+ View details →
Scale Prediction Model

Scale Prediction Model MCP

4 tools Official

Predicts mineral scale formation in oilfield operations using water chemistry and environmental data.

A+ View details →
Perforation Design Optimization

Perforation Design Optimization MCP

4 tools Official

Optimizes perforation geometry and density for oil and gas well completions.

A+ View details →