MCP For Claude Marketplace
Jig Separation Design

Jig Separation Design MCP Connector for Claude

A+

Technical tool for designing jigging circuits based on mineral density and throughput.

4 tools Official Updated Oct 1, 2026 Official Vinkius Partner
More Details Connect to Claude

This MCP server provides specialized tools for mineral processing engineers to design efficient gravity separation circuits. By inputting mineral density differences and particle size ranges, users can use get_circuit_dimensions to determine physical footprint, calculate_pulsation_parameters for optimal bed movement, design_bed_configuration for bed and ragging specifications, and configure_hutch_water_flow to stabilize the separation process.

miningjiggingmineral-processinggravity-separationengineering-tools

4 tools expose this connector's capabilities to your AI agent.

calculate_pulsation_parameters

Determines the optimal frequency and stroke length for the jigging action

configure_hutch_water_flow

Determines the amount of hutch water needed to stabilize the bed and control suction

design_bed_configuration

Defines the thickness of the mineral bed and the necessary ragging layer

get_circuit_dimensions

Calculates the physical footprint and required volume of the jig to handle a specific throughput

See how to talk to your AI agent using Jig Separation Design.

Calculate the jig dimensions for a throughput of 500 m3/h with particle sizes between 0.5mm and 5mm.

The jig requires a length of 4.5m, a width of 3.0m, a total surface area of 13.5m², and a required bed volume of 27.0m³.

What are the pulsation parameters for a density difference of 1.2 g/cm³ and particle sizes from 0.2mm to 2mm?

The optimal pulsation frequency is 145 pulses per minute, with a stroke length of 12mm and a bed fluidization index of 0.85.

Design the bed configuration for a 2.0mm max particle size and 1.0 g/cm³ density difference at 300 m3/h throughput.

The recommended bed depth is 0.45m, the ragging thickness should be 4.0mm, and the ragging material density should be 3.5 g/cm³.

To use `get_circuit_dimensions`, you must provide the target throughput, the minimum particle size, and the maximum particle size in the feed.

Related Connectors

Flotation Clarification System

Flotation Clarification System MCP

4 tools Official

Calculates equipment requirements and economic efficiency for juice flotation processes.

A+ View details →
Shaking Table Design Engineer

Shaking Table Design Engineer MCP

4 tools Official

Calculates physical parameters and capacity requirements for mineral processing shaking tables.

A+ View details →
Column Flotation Design

Column Flotation Design MCP

4 tools Official

Design mineral processing column flotation circuits with precise geometry and hydraulic calculations.

A+ View details →
Gas Lift Design Optimization

Gas Lift Design Optimization MCP

4 tools Official

Optimize gas lift systems by calculating valve spacing, injection depths, and production improvements.

A+ View details →