MCP For Claude Marketplace
Concrete One-Way Slab Designer

Concrete One-Way Slab Designer MCP Connector for Claude

A+

Design reinforced concrete one-way slabs with thickness, reinforcement, and serviceability checks.

4 tools Official Updated Oct 1, 2026 Official Vinkius Partner
More Details Connect to Claude

This MCP server provides structural engineering tools to design reinforced concrete one-way slabs. It calculates the required slab thickness to satisfy deflection limits, determines the main reinforcement needed to resist bending moments, and calculates temperature reinforcement to control thermal cracking. You can also use verify_serviceability to perform a final validation of the design against structural limits. It supports various support conditions including simply supported, continuous, and cantilever spans.

concretestructural-engineeringslab-designreinforcementcivil-engineering

4 tools expose this connector's capabilities to your AI agent.

calculate_slab_thickness

Determines the minimum required thickness of the slab to satisfy structural integrity and deflection limits

verify_serviceability

Performs a final validation of the design against deflection and crack control limits

calculate_main_reinforcement

Calculates the amount of primary steel required to resist bending moments

calculate_temperature_reinforcement

Calculates the secondary steel required to control cracking from thermal effects

See how to talk to your AI agent using Concrete One-Way Slab Designer.

Calculate the required thickness for a 5m span slab with a 10 kN/m² load, 30 MPa concrete, and 500 MPa steel, assuming it is simply supported.

The required slab thickness is 125 mm, and the deflection check is successful.

How much main reinforcement is needed for a 4m span, 150mm thick slab with 12 kN/m² load, 30 MPa concrete, and 500 MPa steel on a continuous support?

The required main reinforcement area is 450 mm² per meter, using 12mm diameter bars spaced at 250mm.

Calculate temperature reinforcement for a 150mm thick slab with 500 MPa steel.

The required temperature reinforcement is 220 mm² per meter, using 10mm diameter bars spaced at 360mm.

The tool supports simply_supported, continuous, and cantilever conditions.

Related Connectors

Concrete Thermal Expansion Calculator

Concrete Thermal Expansion Calculator MCP

4 tools Official

Calculate thermal movement, joint requirements, and induced stress in concrete structures.

A+ View details →
Concrete Joint Spacing Calculator

Concrete Joint Spacing Calculator MCP

4 tools Official

Calculates optimal contraction joint spacing, depth, and sealant requirements for concrete slabs.

A+ View details →
Rebar Lap Length Calculator

Rebar Lap Length Calculator MCP

4 tools Official

Calculate required rebar lap splice lengths and verify structural compliance.

A+ View details →
Diaphragm Wall Design

Diaphragm Wall Design MCP

4 tools Official

Simulate staged excavation and calculate structural demands for diaphragm walls.

A+ View details →