MCP For Claude Marketplace
Concrete Embed Design

Concrete Embed Design MCP Connector for Claude

A+

Design embedment plates in concrete using ACI standards.

4 tools Official Updated Oct 1, 2026 Official Vinkius Partner
More Details Connect to Claude

This MCP server provides specialized engineering tools for designing embedment plates in concrete structures according to ACI Appendix D and Chapter 17 standards. It calculates critical design parameters including anchor bolt size, quantity, embedment depth, and plate thickness. The server accounts for complex engineering factors such as group action and edge effects to ensure structural integrity.

aci-standardsconcreteanchor-boltsstructural-engineeringembedment-design

4 tools expose this connector's capabilities to your AI agent.

calculate_anchor_selection

Determines the required anchor bolt diameter and quantity based on the applied loads

calculate_embedment_depth

Determines the necessary depth for the anchors to ensure sufficient concrete breakout and pull-out strength

calculate_plate_thickness

Calculates the required thickness of the steel embedment plate

validate_group_action

Verifies if the selected anchor arrangement is valid given the concrete geometry

See how to talk to your AI agent using Concrete Embed Design.

What anchor bolt size and quantity do I need for a 50kN tension load and 10kNm moment in 30MPa concrete?

For a 50kN tension load and 10kNm moment in 30MPa concrete, you need 4 bolts with a diameter of 20mm.

Calculate the required embedment depth for 4 bolts of 20mm diameter in 30MPa concrete with a 150mm edge distance.

The required embedment depth is 185mm to ensure sufficient concrete breakout capacity.

What is the minimum plate thickness for a 40kN tension and 5kN shear load on a 200x200mm plate with 16mm bolts?

The minimum required steel plate thickness is 12mm.

The design calculations follow ACI Appendix D and Chapter 17 standards for concrete design.

Related Connectors

Kite Tether Drag Calculator

Kite Tether Drag Calculator MCP

4 tools Official

Calculate aerodynamic drag, anchor load, and flight safety for tethered kites.

A+ View details →
Leg Rope Break Strength Calculator

Leg Rope Break Strength Calculator MCP

4 tools Official

Calculates required surfboard leash strength based on wave dynamics and board weight.

A+ View details →
Solvent Extraction Circuit Designer

Solvent Extraction Circuit Designer MCP

4 tools Official

Design copper or uranium solvent extraction circuits by calculating stages, equipment sizing, and reagent loading.

A+ View details →
Climbing Fall Factor Calculator

Climbing Fall Factor Calculator MCP

3 tools Official

Deterministic rock climbing physics and safety calculator.

A+ View details →