MCP For Claude Marketplace
CO2 Flood Design Tool

CO2 Flood Design Tool MCP Connector for Claude

A+

Design CO2 Enhanced Oil Recovery (EOR) projects by calculating MMP, injection strategies, and recovery estimates.

4 tools Official Updated Oct 1, 2026 Official Vinkius Partner
More Details Connect to Claude

This MCP server provides specialized engineering tools for Carbon Dioxide (CO2) Enhanced Oil Recovery (EOR) design. It allows AI agents to model reservoir conditions and optimize injection parameters. Use calculate_mmp to find the Minimum Miscibility Pressure, design_injection_strategy to determine optimal WAG ratios and injection rates, estimate_recovery_and_recycle to predict oil yield and CO2 recycling needs, and assess_corrosion_risk to evaluate equipment integrity based on temperature and CO2 source.

eorco2reservoir-engineeringcarbon-captureoil-recovery

4 tools expose this connector's capabilities to your AI agent.

assess_corrosion_risk

Evaluates the integrity risks posed by CO2 and water interaction

calculate_mmp

Determines the Minimum Miscibility Pressure required for the specific oil-CO2 mixture

design_injection_strategy

Determines the optimal injection rates and the Water-Alternating-Gas (WAG) ratio

estimate_recovery_and_recycle

Predicts the total oil recovered and the amount of CO2 that will need to be recycled

See how to talk to your AI agent using CO2 Flood Design Tool.

What is the minimum miscibility pressure for an oil with light hydrocarbon makeup at 5000 feet and 180 degrees Fahrenheit?

The calculated Minimum Miscibility Pressure is 2450 psi, and the current conditions are likely to support miscibility.

Estimate the oil recovery for a reservoir with a volume of 10,000,000 barrels, an injection rate of 5000 barrels per day, and a WAG ratio of 1.5.

The estimated total recovery is 1,250,000 barrels of oil, with a daily CO2 recycle requirement of 450 barrels.

What is the corrosion risk for a reservoir at 220 degrees Fahrenheit using industrial capture CO2 at an injection rate of 2000 barrels per day?

The corrosion risk level is High. It is recommended to use corrosion-resistant alloys (CRA) and continuous chemical inhibitor injection.

You can use the `calculate_mmp` tool by providing the oil composition, reservoir depth, and reservoir temperature.

Related Connectors

Concrete Corrosion Predictor

Concrete Corrosion Predictor MCP

4 tools Official

Estimates reinforcement corrosion rates, spalling time, and remaining service life.

A+ View details →
Concrete Corbel Design Tool

Concrete Corbel Design Tool MCP

4 tools Official

Calculate structural reinforcement, shear friction, and bearing capacity for concrete corbels.

A+ View details →
Terminal Spill Response Plan

Terminal Spill Response Plan MCP

4 tools Official

Develop oil spill response plans by modeling discharge scenarios, environmental risk, and resource deployment.

A+ View details →
Polymer Flood Design

Polymer Flood Design MCP

4 tools Official

Design optimal EOR polymer flooding projects by calculating concentration, slug size, and recovery.

A+ View details →